Dukane 403570-01 user manual Welder, Mechanical

Dual Servo Spin Welder User’s Manual

Welder

Mechanical

The part fixture should be securely mounted perpendicular to, and centered under the spin axis.

Electrical Power

Make sure the AC power cord is plugged in to a 240 VAC, 1–phase electrical outlet with a 20 Ampere capacity. Check that the circuit is live. Also refer to Electrical Safety in Chapter 2.

Base Interface Cable

The cable must be plugged in to the base and the back of the press. If the cable is not plugged in, or has a fault, the base switches will not initiate any action, and the ABORT and POWER indicators on the base status display will not function.

Machine Display

Messages

A list of all machine messages, their meaning, and possible solutions to problems are given in Table 9-II.

Page  74 Dukane Manual Part No. 403-570-01