121
The unit will display a completion message when the data transfer is
finished. To return to the Page view, repeatedly press EXIT.
From left to right, these figures show the sequence for naming and
saving a GPS Data File from the unit's memory to an MMC.
4. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press ENT to activate the
selection box, use or to highlight the file, then press ENT to accept
the selection. Next, press to LOAD|ENT. The unit will display a
completion message when the data transfer is finished. To return to the
Page view, press EXIT repeatedly.
These figures show the menu sequence for loading a GPS Data File
from an MMC into the unit's memory.

Cancel Navigation

You can turn off any of the navigation commands after you reach your
destination or at any other time by using the Cancel Navigation
command. Press MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT.
Figure 2.
Figure 1.