Eagle Electronics 1000C manual Sonar Simulator

Map with Sonar split screen.

When this screen is activated, you need to specify which side of the Menu, is active. To toggle between the two windows, press PAGESPAGES. The window with the blue title bar at the top of the screen is the active window. To switch back, just press PAGESPAGES again.

Sonar Simulator

This unit has a built-in simulator that lets you run it as if you were on the water. All sonar features and functions are useable. When in simulator mode, you will see the chart file name in the Sonar Page title bar and a play symbol will flash on and off at the right end of the title bar. To use the simulator:

1. From the Sonar Page, press MENUMENU↓ to SONAR SETUPENT↓ to

SONAR SIMULATOR ENTENT.

Main Menu with Sonar Setup command selected (left). Sonar

Simulator menu, with simulator turned on (right).

NOTE:

With Simulate Position checked, the simulator will also automatically run the GPS simulator (if GPS data was recorded with the sonar log).

82