4.Press ↓ to NAVIGATEENT. The unit begins showing navigation information along the trail.
NOTE:
If you are already located at or near the beginning of your trail, the arrival alarm will go off as soon as you hit ENT. Just press EXIT to clear the alarm and proceed.
5.Now, begin moving and let your GPS guide you.
6.When you reach your destination, be sure to cancel navigation. Press MENUMENU↓ to CANCEL NAVIGATIONENT. The unit asks if you're sure, press ←ENT.
Figure 1. |
| Figure 2. |
|
|
|
Figure 3.
Figure 4.
Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2, Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4, Edit Route Menu with Navigate command highlighted for Trail 6. A trail is always converted to a route when you navigate the trail.
On the Map Page, a course line represents the trail you are navigating. The bearing arrow on the compass rose points to the next waypoint on the trail.
113
