Main Menu with Sonar Setup command selected (left). Sonar
Simulator menu with simulator turned on (right).
NOTE
With Simulate Position checked, the simulator will also automatically run the GPS simulator (if GPS data was recorded with the sonar log).
2.To use the default sonar chart log stored in the unit, press ENTEXIT. The recorded chart begins scrolling across the screen, just as if you were on the water.
3.Turn off the Sonar Simulator by pressing MENUMENU↓ to SONAR
SETUPENT↓ to SONAR SIMULATORENTEXIT.
Title bar with chart file name
"Play" symbol flashing
Sonar Page playing a recorded sonar chart in Sonar Simulator mode.
Tip:
The Sonar Simulator can use sonar charts recorded (logged) on a MMC card. (To see how, read the entry in this section on Log Sonar Chart Data.) To play a sonar chart, make sure the MMC containing the chart is installed, then:
1.Press MENUMENU↓ to SONAR SETUPENT↓ to SONAR SIMULATORENT.
2.Press ↓ to CHART USEDENT.
3.Press ↓ or ↑ to select chart nameENT↑ to SONAR SIMULATOR
ONENTEXIT.
81
