As you travel, the arrival alarm will go off when you near a trail waypoint and the bearing arrow on the compass rose will swing around and point to the next trail waypoint. Press EXIT to clear the alarm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| North |
| |||
| Present |
|
| ||||||
| position |
|
|
|
|
|
|
| |
| arrow |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| trail | line |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Trail point |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Navigate trail map views: the driver (left) is northbound heading straight toward trail point 6. The northbound driver (right) has reached point 6 and has turned west to follow the trail.
1.Press MENUMENU↓ to MY TRAILSENT.
2.Press ↓ to enter the Saved Trail list, then use ↑ or ↓ to select the desired Trail NameENT.
3.Press → to DELETE TRAIL↓ to NAVIGATEENT.
4.Press ↓ to NAVIGATE→ to REVERSEENT← to NAVIGATEENT. The unit begins showing reverse navigation information along the trail.
NOTE:
If you are already located at or near the end of your trail, the arrival alarm will go off as soon as you hit ENT. Just press EXIT to clear the alarm and proceed.
5.Now, begin moving and let your GPS guide you.
6.When you reach your destination, be sure to cancel navigation. Press MENUMENU↓ to CANCEL NAVIGATIONENT. The unit asks if you're sure, press ←ENT.
Transfer Custom Maps and GPS Data Files
Custom Maps
Custom maps work only from the MMC or SDC cards. When a card containing a Custom Map File is loaded into the unit, it automatically loads the map into memory when the unit is turned on.
Instructions for copying Custom Map Files to a MMC are contained in the instruction manual for your MMC card reader and MapCreate 6 software. For instructions on inserting a MMC into the Unit, see Sec. 2, Installation/Accessories.
114
