Waypoint Information screens with the Go Waypoint command selected (left) and the Find on Map command selected (right).
To clear these menus and return to the previous page, press EXIT repeatedly.
5.If you're looking by name, there are two options: A. You can spell out the name in the top selection box. Press ↑ or ↓ to change the first letter, then press → to move the cursor to the next letter and repeat until the
name is correct, then press ENTENT. B. Or you can jump down to the lower selection list by pressing ENT, then use ↓ or ↑ to select a waypoint from the list and press ENT. The waypoint information screen appears.
Find By Name menu (left). Waypoint Information screen (center). The found waypoint is highlighted by the cursor on the Map Page (right).
A. To navigate to the waypoint, press ENT. (Go Waypoint command is already highlighted.) The unit will show navigation information to the waypoint.
B. To find the waypoint, press ↓ to FINDENT. The Map Page appears with the cursor highlighting the found waypoint.
To clear these menus and return to the previous page, press EXIT repeatedly.
178
