Eagle Electronics 2000 manual Reset Options, Reset Water Distance, Set Keel Offset

Reset Options

This command is used to reset all features, options and settings to their original factory defaults. This is useful when you have changed several settings and want to return the unit to basic automatic operation.

1.Press MENUMENU↓ to SYSTEM SETUPENT↓ to RESET OPTIONSENT.

2.Press ← to YESENT.

3.All the menus are cleared and the unit reverts to the Map Page at

the 4000-mile zoom range, just as if you had turned it on for the first time. All options have been returned to the factory settings.

System Setup menu with Reset Options command selected (left). The

Reset Options dialog box (right).

NOTE:

Reset Options does not erase any waypoints, routes, plot trails, or sonar logs.

Reset Water Distance

The sonar chart's Digital Data display option includes a window that shows distance traveled, called Water Distance ("W Distance"). This information is calculated from an optional water speed sensor, not the GPS. The Water Distance window can be reset to zero using the Reset Water Distance command.

Press MENUMENU↓ to SONAR SETUPENT↓ to RESET WATER

DISTANCEENT. The menus are cleared and the water distance is reset to 0.00.

Set Keel Offset

This unit measures water depth from the face of the transducer. Since the transducer is installed below the water surface, the depth displayed by the digital depth, chart depth scale, chart cursor and fish symbols

72