Eagle Electronics 2000 manual Sonar Simulator, Map With Sonar Split Screen

with a "–" next to its name) can be collapsed to hide its contents. Just select the category name and press ENT.

Expand any categories that might contain data you want to display. Then press ↓ or ↑ to select a different data option. With the new option highlighted, press ENT to switch the contents of the flashing box to the new data type and press EXIT. You can now select another box to change. When you are finished with the settings, press EXIT again and the box name stops flashing.

NOTE

A Page display can only show a limited number of data boxes.

Map With Sonar Split Screen

There is a page mode that splits the screen in half, with the map on the left and the sonar on the right. This screen option can be found on the Pages Menu under the Map Page category.

Map with Sonar split screen.

When this screen is activated, you need to specify which side of the Menu is active. To toggle between the two windows, press PAGESPAGES. The window with the blue title bar at the top of the screen is the active window. To switch back, press PAGESPAGES again.

Sonar Simulator

This unit has a built-in simulator that lets you simulate on-the-water conditions. All sonar features and functions are useable. When in simulator mode, you will see the chart file name in the Sonar Page title bar and a play symbol will flash on and off at the right end of the title bar. To use the simulator:

1. From the Sonar Page, press MENUMENU↓ to SONAR SETUPENT↓ to

SONAR SIMULATORENTENT.

80