Emerson CC1000DM Terminology and Notation, Technical References, Additional Information

Models: CC1000DM

1 64
Download 64 pages 27.81 Kb
Page 16
Image 16
Additional Information

1

O V E R V I E W

Additional Information

To obtain a certificate of conformity (CoC) for the CC1000dm, send an e-mail to sales@artesyncp.com or call 1-800-356-9602. Have the part number(s) (e.g., C000####-##) for your configuration(s) available when contacting Artesyn.

Terminology and Notation

Active low signals: An active low signal is indicated with an asterisk * after the signal name.

Byte, word: Throughout this manual byte refers to 8 bits, word refers to 16 bits, and long word refers to 32 bits, double long word refers to 64 bits.

PLD: This manual uses the acronym, PLD, as a generic term for programmable logic device (also known as FPGA, CPLD, EPLD, etc.).

Radix 2 and 16:

Technical References

Table1-2:

Technical References

Hexadecimal numbers end with a subscript 16. Binary numbers are shown with a sub- script 2.

Further information on basic operation and programming of the CC1000dm compo- nents can be found in the following documents:

Device / Interface: Document: 1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Bridge

PCI 6254 (HB6) Dual Mode Universal PCI-to-PCI Bridge Data Book

 

(PLX Technology, Inc.; Version 2.0 May 2003)

 

http://www.plxtech.com/

 

 

CompactPCI

PICMG® 2.0 CompactPCI® Specification/Revision 3.0. October 1, 1999

 

PICMG® 2.1 CompactPCI® Hot Swap Specification/Revision 2.0 January

 

17, 2001

 

PICMG® 2.2 VME64x on CompactPCI® Specification/Revision 1.0 August

 

7, 1998

 

PICMG® 2.3 PMC on CompactPCI® Specification/Revision 1.0 August 7,

 

1998

 

PICMG® 2.4 IP on CompactPCI® Specification/Revision 1.0 August 7,

 

1998

 

(PCI Industrial Computer Manufacturers Group, PICMG; Wakefield, MA)

 

http://www.picmg.org/

 

 

1-4CC1000dm User’s Manual

10004281-02

Page 16
Image 16
Emerson CC1000DM user manual Terminology and Notation, Technical References, Additional Information