Emerson Process Management GmbH & Co. OHG6-2
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
06/2010
6.2 Menu System
Fig. 6-1: X-STREAM XE Software Menu Structure
6.2 Menu System
Notes!
This gure applies to software revision 1.0.x
Numbers are page numbers of this manual, where the
associated menu is explained.
Note!
This overview does only show menu branches
up to the 3rd menu level, not functions nor pa-
rameter lines! E.g. the lines "Pump" or "Lock
menus" of CONTROL are not shown.
The analyzer´s menu system has a dynamic
behavior in that it does not show entries not
supported by the current analyzer congu-
ration. Therefore this overview might show
entries hidden in your specic instrument!
Main Menu 6-2
Service Menu 6-126
Info Menu 6-122
Info Menu Identication 6-125
Info Menu Measurements 6-125
Info Menu Installed Options 6-124
Info Menu Components 6-123
Info Menu Measurements 6-123
Status Menu 6-108
Status Menu Alarms 6-119
Operation Hours Status 6-121
Alarms Status Details 6-120
Status Menu Calibration 6-116
Next Automatic Calibrations Menu 6-118
Status Menu Single Calibration 6-116
Status Menu Measurement 6-111
Status Menu Flow Sensors 6-115
Status Menu Pressure Sensors 6-115
Status Menu Temperature Sensors 6-114
Status Menu Component 6-112
Status Menu Function Checks 6-110
Status Menu Maintenance Requests 6-110
Status Menu O-specs 6-109
Status Menu Failures 6-109
Setup Menu 6-21
Control Menu 6-5
Note!
See next page,
upper diagram.
Note!
See next page,
lower diagram.