Emerson Process Management GmbH & Co. OHG8-12
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
06/2010
8.3 Solving Problems Not Indicated by Status Messages
The following table lists possible faults not
detectable by the instrument‘s software, gives
hints on the potential causes, and tips on how
to solve the problems.
If solving a problem requires working inside
the instrument take care of the safety instruc-
tions given at the beginning of this manual!
Note on X-STREAM eld housings!
To see the current analyzer status, or ope-
rate the instrument even if the front door is
open, just loosen the screw, xing the front
panel, and swivel the front panel to the side
or to the top (ameproof XEFD), as shown in
gure 8-1.
8.3 Solving Problems Not Indicated by Status Messages
Fig. 8-1: X-STREAM XEF, XDF and XEFD, Opened With Visible Front Panel
Screws to loosen
swivel to the right swivel to the top
Notes!
Recommended actions preceded by a bullet
are alternatives.
If recommended actions do not solve a pro-
blem, call Emerson Service!