Emerson Static Transfer Switch user manual Event messages continued, Alarm and Faults

		Alarm and Faults
Table 8	Event messages (continued)
ID	Alarm Message	Description/Cause	Action
084	CB1 (S1) OPEN	Source 1, Circuit Breaker 1 is open.	A, E
085	CB2 (S2) OPEN	Source 2, Circuit Breaker 2 is open.	A, E
086	CB4 (S1 BYP) CLOSED	Source 1 on bypass, Circuit Breaker 4 is closed.	A, E
087	CB5 (S2 BYP) CLOSED	Source 2 on bypass, Circuit Breaker 5 is closed.	A, E
088	CB3 (OUTPUT) OPEN	Output circuit breaker (CB3) is open.	A, E
089	CB3A (OUTPUT) OPEN	Output circuit breaker (CB3A) is open.	A, E
090	S1 PHASE ROT ERROR	Source 1 phase rotation error.	A, E
091	S2 PHASE ROT ERROR	Source 2 phase rotation error.	A, E
092	TRANSFER INHIBITED	Transfer inhibited.	A, E
093	OUTPUT UV	Output is under voltage.	D, F, A, E
120	INPUT CONTACT #1	Input Contact # x is an optional alarm input. The alarm name	A, E
121	INPUT CONTACT #2	can be programmed with an alarm name from the Input
122	INPUT CONTACT #3	Contactor Isolator settings option under the Comm Options.
123	INPUT CONTACT #4	See Configuring the Input Contact Isolator Settings on
124	INPUT CONTACT #5	page 95. The alarm is sent to Monitor DSP. The LCD logs the
125	INPUT CONTACT #6	alarm with the programmed name. Monitor DSP logs it with the
126	INPUT CONTACT #7	generic name which is how it is reported to the SVT query.
127	INPUT CONTACT #8
128	CONFIG MODIFIED	A set point configuration has changed.	A, E
129	PASSWORD CHANGED	The password for touch screen access has been modified and	A, E
		saved.
130	TIME REPROGRAMMED	The system’s time has been reset and saved.	A, E
131	DATE REPROGRAMMED	The system’s date has been reset and saved.	A, E
132	EVENT LOG CLEARED	The event log has been erased.	A, E
133	HIST LOGS CLEARED	Both History Logs have been erased.	A, E
134	HIST LOGS FULL	Both History Logs have been written and no more history logs	A, E
		can be written without clearing one of the logs.

75