Communication Interfaces
Examples of Event Mask Settings
•To latch event #001, S1 SCR SHORT, use SPT 4 1 +L.
•To disable event #128, CONFIG MODIFIED, from sounding the horn, use SPT 4 100
•To enable event #012, OUT VOLT SENSE FAIL, to Dial and go into the Event Log, use SPT 4 12 +D+E.
•To disable all masks for event #120, INPUT CONTACT #1, use SPT 4 120
To breakdown this syntax for the last example:
•SPT — SVT command
•4 — group parameter, identifying System Setting group under which the Event Mask settings reside.
•120 — item parameter. In this command, that is the event ID.
•
84