Instruction Manual

IB-106-300NH Rev. 4.2 July 2002

World Class 3000

OUTPUT

JUMPER

 

 

HPS

Remove JM6

Probe (No HPS)

Install JM6

 

 

 

 

ANALOG OUTPUT

 

(Condition during

 

microcontroller failure)

Jumper

Output = zero

Install JM7

Output = maximum

Remove JM7

 

 

chart recorders. Relay outputs are typi- cally sent to annunciators.

3.Relays K1 and K2 are user configur- able from the probe SETUP sub-menu (Table 5-5). Typically these are used to indicate O2 values above or below specified tolerances. OK relay is ener- gized when unit is functioning properly.

4.All wiring must conform to local and national codes.

(See Figure 2-10for jumper locations.)

Figure 2-9. Microprocessor Board

Jumper Configuration

c.Analog Output and Relay Output Connections

5.Connect the analog output and relay outputs as shown in Figure 2-12.

2-3 HEATER POWER SUPPLY INSTALLATION

a. Mechanical Installation

1.The microprocessor board has a se- lector for voltage or current operations. Figure 2-10shows switch orientation. In voltage mode, output is 0-10 V. In the current mode, the output can be configured from the SETUP menu to be 0-20 mA or 4-20 mA.

2.The analog output and relay outputs are programmed by the user as needed. The analog output is typically sent to recording equipment such as

The outline drawing of the heater power supply enclosure in Figure 2-13shows mounting centers and clearances. The NEMA 4X enclosure is designed to be mounted on a wall or bulkhead. The heater power supply should be installed no further than 150 feet (45 m) from the probe. The heater power supply must be located in a location free from significant ambient tem- perature changes and electrical noise. Am- bient temperature must be between -20° and 140°F (-30° and 60°C).

2-14 Installation

Rosemount Analytical Inc. A Division of Emerson Process Management

Page 45 Page 47
Page 46
Image 46
Emerson Process Management 3000 Output Jumper, Analog Output, Condition during Microcontroller failure Jumper
Page 45 Page 47

3000 specifications

Emerson Process Management is a key player in the field of industrial automation, and one of its flagship offerings is the Emerson Process Management 3000. This system is designed to optimize production processes across a variety of industries, enhancing efficiency and ensuring robust operational performance.

One of the main features of the Emerson Process Management 3000 is its advanced control capabilities. The system employs model predictive control (MPC) technology, which allows for real-time data processing and decision-making. By predicting future trends in process variables, the MPC enables operators to adjust control parameters proactively, minimizing fluctuations and improving overall productivity.

Additionally, the Emerson 3000 integrates seamlessly with existing industrial infrastructure. This system supports a wide range of communication protocols, ensuring compatibility across various devices and sensors. Its flexibility allows companies to leverage their investment in existing technologies while upgrading to more modern control strategies.

The user interface of the Emerson Process Management 3000 is highly intuitive, featuring graphical displays that provide operators with clear visibility into process parameters. This interface is designed for ease of use, with customizable dashboards that can be tailored to meet the specific needs of the users. Training time is significantly reduced due to the straightforward design, leading to quicker onboarding for new operators.

In terms of data analytics, the Emerson 3000 also stands out. It features built-in data logging and trend analysis capabilities, empowering operators to make informed decisions based on historical and real-time data. This analytical strength helps in identifying inefficiencies and potential areas for improvement, contributing to reduced downtime and lower operational costs.

Safety is another critical characteristic of the Emerson Process Management 3000. The system includes robust safety features and compliance with various industry standards. By integrating safety into the control process, it ensures that product quality and equipment integrity are maintained, thus safeguarding both personnel and assets.

Overall, Emerson Process Management 3000 is a sophisticated control system that combines advanced technologies, user-friendly design, and robust safety features. Ideal for industries such as oil and gas, chemicals, and water treatment, it is designed to enhance operational efficiency and drive productivity in modern industrial environments.
Top Page Image Contents