Wireless Network Hardware Installation Overview
3-10
Ad-Hoc Network
The following is an overview of the steps to install the wireless clients in an Ad-Hoc
network.
1. Create wireless clients by installing the RoamAbout PC Card into the appropriate
computers. Refer to the RoamAbout PC Card documentation.
2. If installing the RoamAbout Client Utility (recommended), see the “RoamAbout
Client Utility” on page 4-7.
3. Configure the wireless clients, as described in the RoamAbout 802.11 PC Card Dr ivers
and Utilities Setup and Installation Guide.