Telnet
4-6
Telnet
You can manage the RoamAbout R2 through Telnet. However, you must first assign the
R2 an IP address.
Perform the following steps to access the R2 through Telnet:
1. Open a DOS Prompt.
2. Telnet to the IP Address that you assigned to the RoamAbout R2.
For example: telnet 10.0.0.00
You are prompted for a username and password. The default username is admin and
the default password is password. The Main Menu appears.
3. Ensure that your preferences are set to use the arrow keys.
Web Management
You can manage the RoamAbout R2 through your web browser. However, you must first
assign the R2 an IP address. Refer to Appendix B for the procedure to connect a device to
the AP console port.
The RoamAbout R2 web management runs on the following browsers:
•Netscape Communicator V4.5, V4.6, V4.7 and V6.0 (and later)
•Microsoft Internet Explorer V4.0 and V5.0 (and later)
You must set the browser proxy to Direct Internet Connection. Then enter the IP address
that you assigned to the RoamAbout R2 in the browser window. You are prompted for a
username and password. The default usern a me is admin and the default password is
password.