ADJUSTING THE PRINTER SETTINGS
FACTORY RESET
Use this feature to reset all Level 1 and Level 2 settings to their factory settings.
Note: ❐ If you wish to reset the Level 1 settings, but not the Level 2 settings:
Use the LOAD MACRO routine to load macro 0 (see page 32).
❐If you wish to reset the Level 2 settings, but not the Level 1 settings:
Store the current Level 1 settings as a macro (see SAVE MACRO, page 31). Then do the FACTORY RESET procedure as stated below. Then reload the macro that you just stored containing your Level 1 settings (see LOAD MACRO, page 32).
1. Enter Level 2 mode (see page 34).
2.Press 
or 
until FACTORY RESET is dis - played.
3.
4. Reset the machine:
Caution: Do not turn off the printer until the READY message appears on the display. If you turn the printer off too soon, you may see "START UP ERROR" the next time you turn on the printer. See page 47 for how to clear the error.
VERSION
Use this feature if you wish to display the version number of the printer’s control soft - ware and fonts.
1. Enter Level 2 mode (see page 34).
2. Press 
or 
until VERSION is displayed.
3. 
. The printer control software
4.Press 
or 
. The font version number is displayed.
5.
6. 
twice to return to printer "Ready" mode.
42
