Epson 60 manual Conventions

INTRODUCTION

Operating the Printer

On Line

You can print data from your computer at any time, if the printer is on line (see page 14 for how to switch the printer on line).

Off Line

No data can be received from the computer if the printer is off line. However, any data in the printer buffer can be printed manually by the Form Feed procedure (see page 14).

Function 35: Printer "Ready"/Set Up Mode (Selectype Mode)

In this mode, you can access a wide range of printer set-up features. Printer setup mode is called "Selectype" mode. It is described on page 21 and the pages following that. You can switch between On Line and Off Line if the printer "READY" display is showing, but not if the printer is in Selectype mode.

To enter Printer Ready/Set Up Mode, use Function 35

Function 3 5 Yes

You can combine these into a keystroke program to enter this mode quickly. For infor- mation on how to make a keystroke program, see the Operator’s Manual for your fax machine.

To leave Printer Ready/Set Up mode:

Return to fax standby mode only from the printer "READY" display (shown above right). To return to the "Ready" display, press repeatedly.

Press

Function

to return to fax standby mode.

Also, if you do not touch the machine for 4 minutes while it is in printer mode, the ma- chine will return to fax standby mode.

CONVENTIONS

The following conventions were used when writing this manual.

Keynames: Mainly, these have been placed in a different typeface, and enclosed in a

box. For example: Function means "Press the Function key". For the arrow keys,

(for example) means "Press the key".

Displays: Messages seen in the bottom line of the display panel are shown in a larger box, normally to the right of the operation that causes the display to appear.

3