Epson 60 manual Paper Size Condensed Portrait Landscape 10 cpi 12 cpi 15 cpi

APPENDIX C. EPSON LQ AND FX EMULATION MODES

SUB CONFIG.

The SUB CONFIG. is a menu within Selectype Level 1. It contains these features.

❐PITCH: Use this to select a character pitch of 10, 12, or 15 characters per inch (cpi), or proportional spacing (PROP). A setting of 10 provides more space between char - acters, and 15 provides less.

❐CONDENSED: Use this to change the character spacing. Condensed printing is use - ful for spreadsheets and other applications where you need to fit a lot of information on each line. Fonts with a pitch of 15 cpi cannot be condensed.

❐L-MARGIN:Use this to set the left margin. Margin units are determined by the cur - rent pitch (cpi) and the condensed setting (on or off). The factory setting is 0.

If you select proportional, 10 cpi and condensed determine the margin units. If you change the setting of ORIENT, PAGE SIZE, or WIDE PAGE (when PAGE SIZE is set to A4 [8.3" x 11.7"]), the left margin defaults to 0.

❐R-MARGIN:Use this to set the right margin. Margin units are determined by the cur - rent pitch (cpi) and the condensed setting (on or off). The factory setting is 80.

If you select proportional, 10 cpi and condensed determine the margin units. If you change the setting of ORIENT, PAGE SIZE, or WIDE PAGE (when PAGE SIZE is set to A4 [8.3" x 11.7"]), the right margin defaults to the following setting.

Paper Size	Condensed		Portrait			Landscape
		10 cpi	12 cpi	15 cpi	10 cpi	12 cpi	15 cpi
A4	OFF	77	93	116	111	134
	ON	133	155		191	223	167
A4-80 col	OFF	80	96	120	111	134
	ON	137	160		191	223
Letter	OFF	80	96	120	105	126	157
	ON	137	160		180	210
Legal	OFF	80	96	120	135	162	202
	ON	137	160		231	270

C-3