APPENDIX B. HP EMULATION MODE
5.
6.Press 
or 
until the required font number is displayed. Example: Font number 1.
Note: Font types are displayed only as numbers in this procedure. To see the font types that correspond to each font number, print a font sample sheet (use the FONT SAMPLE procedure on page 9).
7. Store the displayed setting:
If you have just selected a scalable font, you must perform an additional step.
For proportional fonts: The display is as shown on the right.
❐Press 
or 
to select the point size that you need, then press 
.
Available settings: 4.00 to 999.75 in steps of 0.25
For fixed pitch fonts: The display is as shown on the right.
❐Press 
or 
to select the spacing in char - acters per inch, then press 
.
Available settings: 0.44 to 99.99 in steps of 0.01
8.
until the machine returns to printer "Ready" mode.
You can only select fonts that match the current orientation setting. If you change the SYMSET or ORIENT settings, the available font numbers may change.
To save the selected font as the default font, use the SAVE MACRO routine (see page 31).
