Using the NET USE command

If you are running Windows XP/Server 2003/2000/NT and using NetBIOS to connect to the device, we recommend that you use the NET USE command, as follows:

1.Right-click the Network Neighborhood icon or My Network Places icon and then select Properties.

2.Check that Client for Microsoft Networks is in the Components list. If it is not installed, click Add to install it.

3.Run the command prompt and enter the following command.

NET USE printer port: \\NetBIOS name of network interface\Device name of network interface

Selecting the port

1.Click Start, point to Settings, and then select Printers.

2.Right-click the printer icon and select Properties.

3.Click the Details tab and select the port you have set with the NET USE command.

Windows Server 2003

For Windows Server 2003, the printer driver installation procedure differs depending on the printing method you prefer. Epson recommends printing with EpsonNet Print. See “For Windows XP/Server 2003/2000/NT 4.0 Users”.

118