1.Insert the Software CD-ROM shipped with the printer.

2.Close the EPSON Installation Program screen if it appears.

3.Click the Have Disk button. The Install From Disk dialog box appears.

4.Click Browse.

5.Select the CD-ROM drive for Drives, and double-click the appropriate folder for your operating system. Click OK.

6.Click OK in the Install From Disk dialog box.

7.Select the model name of the printer, and then click Next.

Note:

If the Add Printer wizard asks you to select either Keep existing driver or Replace existing driver, be sure to select the Replace existing driver radio button. Click Next.

8.Click Finish and follow the on-screen instructions to complete the setup.

The printer is now ready for peer-to-peer printing. To configure the printer port, go to “Configuring the Printer Port”.

For Windows Me/98/95 Users

Follow the steps below to add a port using the Add Printer Wizard.

❏If you want to add a port for the printer with its IP address assigned automatically from the DHCP server or router, see “Adding a port for a printer assigned with a dynamic IP address”.

181