❏You can only display or read data on the memory card.

❏When you access the Network Storage and delete data on the memory card, the data disappears. However, the data is not actually deleted so the data appears again when you select Refresh from the View menu.

Accessing the network storage

The network drive you mapped appears in My Computer. To display or read the file, double-click the network drive icon.

Note:

When the network drive does not appear in My Computer, connect it manually. See “Using the network storage” for more details.

Disconnecting the network storage

To disconnect the network drive of the network storage, right-click the network drive icon, and then select Disconnect.

Changing the network storage information

You can change the host name or the storage name you specified in the Run dialog box by using EpsonNet Config. For more detailed information, see EpsonNet Config Reference Guide or “About EpsonNet Config”.

For Macintosh

Configuring the network interface

Configure the network interface for use on the TCP/IP network, and install the drivers for the all-in-one and the utility on your computer.

86