On the Advanced tab of the Local Area Connection Properties dialog box, the Internet Connection Firewall setting is on.

In the EPSON Scan Setting dialog box, click the Add button. In the Add dialog box, select the Enter address radio button and then enter the IP address.

Macintosh environment

Devices do not appear in Chooser.

Cause

What to do

 

 

You may have selected a wrong one for “Connect via” in the AppleTalk Control Panel.

Make sure to select Built-in Ethernet or AirMac in AppleTalk Control Panel, and make sure AppleTalk is active in Chooser. Also, check the network equipment including the hub cable.

The Rendezvous printer setting is overwritten by the AppleTalk printer setting when the same printer is set up with AppleTalk after the printer is set up with Rendezvous.

Change the AppleTalk printer name so that it does not conflict with the Rendezvous printer name.

NetWare environment

Nothing prints even though clients have sent data to the device.

273