There are several possible causes. Check the items described on the right.
Make sure the network interface is properly connected to the device using the USB cable.
Make sure the device and the network interface are turned on.
Make sure the mode, WEP Key, SSID, authentication method, and channel (for Ad Hoc mode) of the network interface and the wireless LAN are the same.
Make sure there is no radio interference causing the problem.
Check the connection range of the network interface.
The wireless communication speed is very slow.
Cause | What to do |
|
|
There are several possible causes. Check the items described on the right.
Adjust the location and orientation of the access point.
If interference occurs, switch to another channel.
Other devices may be causing the interference. Relocate the “noisy” devices if found.
Unable to start EPSON Scan.
Cause | What to do |
|
|
269