For EPSON STYLUS PHOTO RX500/600 and EPSON STYLUS CX4600/6400/6600 Users

For Windows

Configuring the network interface

Configure the network interface for use on the TCP/IP network, and install the drivers and the utility for the all-in-one on your computer.

Make sure the all-in-one is set up and the software for the all-in-one is installed on your computer before taking the steps below. See the manual shipped with the all-in-one for detailed instructions.

Note:

❏If EpsonNet WinAssist is installed on your computer, uninstall it before following the steps below.

❏It is a good idea to write down the SSID and WEP Key or WPA Personal password before taking the steps below.

❏Windows Server 2003 does not support this function.

1.Insert the Software CD-ROM in the CD-ROM drive.

If the Installer dialog box does not appear automatically, double-click EPSETUP.EXE on the CD-ROM.

65