If DHCP is used to assign an IP address of the network interface and the Dynamic DNS function is not supported, you need to change the printer port setting every time you turn on the device. Therefore, we recommend that you set a valid IP address for the network interface by using the one of the following methods.

❏Set the IP address for the network interface manually. Use EpsonNet Config. See the EpsonNet Config Reference Guide for details.

❏Specify the network interface by using the bind of DHCP function.

❏Set the exclusive address of the DHCP function.

Note:

❏Use NetBEUI printing if you do not want to go through these steps.

❏See the manual of the Dial-Up router for more information on scorp range, bind, exclusive address of the DHCP function.

Function of Universal Plug and Play

When you connect your device to the network, the device is automatically assigned with an IP address, and the printer's icon appears in the My Network Places folder. By double-clicking the printer's icon, you can access EpsonNet Config with Web Browser for basic information about the device, such as manufacturer, model name, location, and administrator’s name.

Right-click the printer's icon in the My Network Places folder and select Properties. You can check the brief information of the network interface.

261