❏If the device power is off or there is a problem on the network, the Get status every 20 sec check box is automatically cleared. If this happens, make sure that the device power is on and the device is correctly connected on the network, and then select the Get status every 20 sec check box again.
5.Click OK to save settings.
6.When a message appears saying the settings are correctly configured, click OK to start the Add Printer Wizard. Click
Next.
Note:
If you click Cancel and then later want to add the device, start the Add Printer Wizard and follow the steps below.
7.Click the Local printer radio button and click Next.
8.Select the printer driver and click Next.
If the following dialog box appears, select Replace existing driver and click Next.
196