Using the NET USE command
If you are running Windows XP/Server 2003/2000/NT and using NetBIOS to connect to the device, we recommend that you use the NET USE command, as follows:
1.Click Start, point to Control Panel, and then select Network Connections. Click Local Area Connections.
2.Click the Properties button.
3.Check that Client for Microsoft Networks is installed. If necessary, click Install to install it.
4.Run the command prompt and then enter the following command.
NET USE printer port: \\NetBIOS name of network interface\Device name of network interface
Selecting the port
1.Click Start, and then select Printers and Faxes.
2.
3.Click the Ports tab and then select the port you have set using the NET USE command.
Windows 2000
For Windows 2000, the printer driver installation procedure differs depending on the printing method you prefer. Epson recommends printing with EpsonNet Print. See “For Windows XP/Server 2003/2000/NT 4.0 Users”.
125