For the laser printer

For Windows XP Service Pack 2 Users

If you share the laser printers on the computer running Windows XP Service Pack 2 on the network, client computers with the following conditions cannot monitor the printers using EPSON Status Monitor 3:

❏Client computers running Windows Me/98/95

❏Client computers located in another network segment

Solution

1.Click Start, point to Control Panel, and then select Security Center. Click Windows Firewall.

2.Click the Exceptions tab, and then click the Add Program button.

3.Click the Browse button.

4.Select the program located in the following folder, using the Look in pull-down menu.

C:\Program Files\Common Files\EPSON\EBAPI\EEBAgent.exe

Note:

❏Substitute the drive letter for your operating system.

❏If you have upgraded EPSON Status Monitor 2 to EPSON Status Monitor 3, select the folder where EPSON Status Monitor 2 is installed.

5.Confirm that EEBAgent.exe is registered in the Programs list, and then click OK.

281