This section contains instructions on using the network interface in the Print Server mode on NetWare 3.x/4.x/IntranetWare with Bindery emulation.
Note:
The network interface in the Print Server mode of NetWare 3.x does not allow you to use the Print Server status display control with
PCONSOLE.
1.Turn on the device.
2.From any NetWare client, log in to the target NetWare server with supervisor privileges. You must log in with the bindery connection.
3.Configure the network interface using EpsonNet Config. See the EpsonNet Config Reference Guide for details.
If NetWare objects are already created, you can also use EpsonNet Config with Web Browser. See “NetWare” for details.
Using NDS Print Server (NetWare 4.x/5.x/6.0)This section contains instructions for using the network interface in the Print Server mode on NetWare 4.x, IntranetWare, NetWare 5.x, or NetWare 6.0 with NDS mode.
1.Turn on the device.
2.From any NetWare client, log in to the target context of the NDS tree as an ADMIN.
221