4.Click Security Level under Network. Make the following settings.

Items

Explanations

 

 

Security Level

Select the security level from the list.

 

Note:

 

If you are using EpsonNet 802.11g Wireless

 

Ext. Print Server in the Ad Hoc mode, you

 

cannot use WPA-Personal (TKIP) for the

 

security level.

 

 

WEP Authentication

Select an authentication algorithm: Open

Method

System, Shared Key, or Automatic.

 

(This item is dimmed when WPA-Personal

 

(TKIP) is selected for the security level.)

 

 

WEP Settings (appears for WEP-64bit or WEP-128bit security level)

 

 

Input using hex

Select this check box to set the WEP Key in

 

hexadecimal.

 

 

WEP Key (1 to 4)

When you select 64 bit(40 bit) for the length,

 

you can set up to 4 WEP Keys. When you

 

select 128 bit(104bit), you can set only one

 

WEP Key.

 

For 64bit and ASCII, enter 5 characters.

 

For 64bit and Hex, enter 10 digit values.

 

For 128bit and ASCII, enter 13 characters.

 

For 128bit and Hex, enter 26 digit values.

 

Note:

 

The WEP Key disappears after the network

 

interface is configured. Therefore, do not

 

forget the WEP Key you have set.

 

 

Active WEP Key

Select one WEP Key as an active key before

 

enabling use of encryption.

 

 

WPA Settings (appears for WPA-Personal security level)

 

 

Password

Enter the password for WPA-Personal

 

authentication (8 to 63 characters).

 

 

Password (again)

Enter the password again.

 

 

62