Epson Ext. Print Server Using the NDPS Gateway

Configuring for NetWare using EpsonNet Config

1.Turn on the device.

2.Load the print server from the file server’s system console which the print queue volume is set.

>LOAD PSERVER print server name you set using NWAdmin

3.Configure the network interface using EpsonNet Config. See the EpsonNet Config Reference Guide for details.

If you use the NetWare objects that are already created, you can use EpsonNet Config with Web Browser too. See “NetWare” for details.

Using the NDPS Gateway

This section contains instructions on printing using Novell Distributed Print Services® (NDPS®) with Novell® NetWare® 5.x/6.0. Novell Distributed Print Services (NDPS) is the new generation print services of NetWare.

Note:

❏Banners cannot be printed with NDPS.

❏The Status Monitor 3 utility cannot be used with NDPS.

❏Bind the IP or both IP or IPX protocols on the NetWare server that runs NDPSM.NLM and EPSONGW.NLM.

Check the following points before starting.

❏Install the appropriate client software, such as Novell Client 3.3 or later for Windows 95/98, Novell Client 4.8 or later for Windows 2000/NT 4.0, or Novell Client 4.9 or later for Windows XP on client workstations. Make sure they install NDPS.

234