❏Security lock

Insert a commercially available theft-prevention cable through the security lock, which is located on the back panel of the network interface, to secure the device to a table or pillar. This network interface is compatible with the Microsaver Security System manufactured by Kensington.

Notes on radio waves

❏Radio wave interference may occur when there are devices that use radio waves within the 2.4 GHz ISM band near the network interface. Therefore, separate the network interface from these devices as much as possible to prevent radio wave interference.

❏When using the network interface in the Ad Hoc mode, radio wave interference may occur if the channel of the network interface and the other devices are close to each other. Therefore, separate a few channels from the channel used near the network interface.

❏Shorten the distance of the network interface and devices that communicate with the network interface.

Where to locate the network interface

❏The location of the network interface must be considered to improve the wireless communication. The rotary stand can provide a good position. The condition of radio wave can be checked using EpsonNet Config, lights of the network interface, and the status sheet.

Package Contents

Your network interface package includes the following items.

4