In NetWare Administrator, double-click the NDPS Manager object and click the Printer Agent List button. Check that the status of the Printer Agent you have just created is “Idle”.

Note:

If you have selected Remote (rprinter on IPX), configure the network interface using EpsonNet Config, as described in the next section, and then print a status sheet.

Go to the next section if you select Remote (rpinter on IPX). Go to “Setting the printer on client workstations” if you select Remote (LPR on IP) or Forward jobs to Queue.

Configuring for NetWare using EpsonNet Config

Follow the steps below if you want to use the printer in IPX network.

Note:

Be sure that the one of the following clients is installed on your computer: Novell Client 32, Novell IntranetWare Client, or Novell Client.

1.Turn on the device.

2.From any NetWare client, log in to the target NetWare server as an ADMIN.

3.Run EpsonNet Config from the Start menu. See “Accessing the EpsonNet Config Reference Guide” for details.

If the IP address of the printer is already assigned, you can use EpsonNet Config with Web Browser too. See “NetWare” for details.

240