You have not set the IP address for the network interface.
Set the IP address for the network interface using EpsonNet Config for Windows or Macintosh, the printer’s control panel, or the arp/ping commands. You can check the IP address on a status sheet. See the EpsonNet Config Reference Guide or “Setting an IP Address Using the arp/ping Command”.
Unable to set the IP address using the arp/ping commands.
Cause | What to do |
|
|
The network interface is not | Connect the network interface to the |
connected to the network. | network, and check the network |
| environment. |
|
|
The device is located beyond | The device and the computer must be in |
the router. | the same segment. |
The Model Name and IP Address do not appear in the EpsonNet Config dialog box.
Cause | What to do |
|
|
If the valid IP address is not set, the items indicated in the dialog box mentioned above may not appear.
Set a valid IP address.
Refresh the status by selecting Refresh from the View menu.
Increase the length of time before a timeout. To do this, select Options from the Tool menu, and then select Timeout. Note that doing so can cause EpsonNet Config to run more slowly.
An extra account is generated when using the
267