How To

Overview

This section describes the general procedure on how to set up the network interface for use on a network.

1.Check the network interface operation.

Check the functions and operations of the network interface, such as status lights, status sheet button, USB connector, DC-IN connector, and security lock. See “Network Interface Operation” for details.

2.Select a printing method.

Select a printing method appropriate for your network environment and operating system. If you are not sure, see “Printing from Windows” or “Printing from Macintosh” for details.

3.Install the necessary components on your computer.

Make sure the necessary components (such as TCP/IP, NetBEUI, etc.) are installed on the computer, and network settings (such as IP address, subnet mask, etc.) of the computer is set. See “About Installing Components on Your Computer” for details.

4.Insert the Software CD-ROM in the CD-ROM drive to configure the network interface.

If you are using one of the following Epson devices, see “For Windows” or “For Macintosh” for details.

21