5. Fan a stack of paper (up to 150 sheets); then tap the sides and
bottom of the stack on a flat surface to even it up.
cCaution:
Do not use labels in the cut-sheet feeder.
6. Insert the paper along the right paper guide and adjust the
position of the left paper guide so that it matches your paper’s
width. Make sure the position of the guide allows the paper to
move up and down freely. Then lock the left guide in place.
Note:
Load paper with the printable side up. If you are using pre-printed
forms, load the forms top-down.
A63
5
R
Adonis Rev.E
A5 size Chapter 5
97/04/07 pass 0
Using Printer Options 5-9