Windows will now use the LQ-670 as its default printer on
port LPT1. If you need to change the default printer or the port
assignment, use the Control Panel Printers utility.
Using the printer driver
Before you start printing, you should make sure that the printer
driver settings match your document requirements. While many
Windows applications override the printer settings made with the
driver, some do not.
See this section for instructions on how to access the printer driver,
check the printer driver settings, and change settings if necessary.

Accessing the printer driver from Windows applications

When you access the printer driver settings from a Windows
application, any settings you make apply only to the application
you are using. The access method explained below is typical for
many Windows applications, but the way you access your printer
driver may differ depending on your application. See your
application manual for details.
To access the printer driver settings, select Print Setup or Print
from the File menu of your application software. If you choose
Print Setup, you see your application’s Print Setup dialog box,
where you can make settings for paper size, paper source, and
orientation. Some applications also feature an Options button,
which allows you to access the printer driver’s Options dialog box.
If you choose Print, you see your application’s Print dialog box.
To access the printer driver settings, choose Printer, Setup, or
Options, depending on the options available in your application
software. (You may need to choose a combination of these options.)
Note:
Your application software may let you access only a portion of the printer
driver.
LAdonis Rev.E
A5 size Chapter 2
96/12/19 pass 0
2-10 Setting Up Your Software