qIf you want to eliminate the top margin and print at the very top of
the page, adjust the loading position so that the top of the paper lines
up with the raised line on the ribbon mask, as shown below.
5. After you set the loading position, press the Pause button to
turn off micro-adjust mode.
For both single-sheet and continuous paper, your loading position
setting remains in effect until you change it, even if you turn off
the printer.
Adjusting the printing position
The printing position is the position on the page where the print
head actually prints during a print job. You can change the current
vertical printing position temporarily by using the micro-adjust
feature as described in the steps below.
Note:
Your printing position setting is in effect only until the next time you
load paper or turn off the printer.
1. Make sure that the printer is not printing. If it is, press the
Pause button to stop printing.
raised line
A68
3
R
Adonis Rev.E
A5 size Chapter 3
97/04/07 pass 0
Paper Handling 3-29