0 slash
The zero character has a slash (0) when this feature is on; it has
no slash (0) when this feature is off. The slash allows you to easily
distinguish between an uppercase letter “O” and a zero.
High speed draft
In high speed draft mode, the printer prints up to 300 cps
(characters per second) at 10 cpi (characters per inch) when the
Draft font is selected. If you select normal speed draft, it prints
up to 250 cps at 10 cpi when Draft is selected.
Input buffer
The input buffer stores data sent f rom your computer. The input
buffer can store up to 64KB of data, so you can free your computer
for other tasks while the printer prints. When the buffer is off, the
buffer cannot store data, so the computer must wait for the printer
to print each character before sending the next character.
Buzzer (beep)
The printer beeps when an error occurs. See Chapter 7,
“Troubleshooting,” for more information. If you do not want
the printer to beep, turn off this feature.
Auto CR (carriage return)
When auto carriage return is on, each line feed (LF) code or ESC J
code is accompanied by a carriage return (CR) code so the printer
moves the next printing position to the left margin. When this
feature is off, you must send a CR code after the line feed code to
move the printing position to the left margin. This feature is
available only in IBM emulation mode.
4
R
Adonis Rev.E
A5 size Chapter 4
97/04/07 pass 0
Using the Control Panel 4-13