Using Envelopes You can print on a variety of envelopes, loading them in the same
way as you load single sheets: from the paper guide or with the
optional cut-sheet feeder. For information on loading envelopes,
read this section and see “Using Single Sheets” earlier in this
chapter or “Loading paper from the cut-sheet feeder” in Chapter 5.
Before printing, set the paper thickness lever to the correct position
for your envelopes as described in the table on page 3-6.
Load envelopes face up, long edge first. Make sure that the right
edge guide is aligned with the arrow on the paper guide, and
position the left edge guide to match the width of your envelope.
cCaution:
❑When printing on envelopes, make sure that your software
settings keep the printing entirely within the printable
area. Printing on the edge of an envelope can damage the
print head. For information about the printable area, see
the paper specifications in Appendix A.
❑Use envelopes only under normal operating conditions.
A38
3
R
Adonis Rev.E
A5 size Chapter 3
97/04/07 pass 0
Paper Handling 3-23