Epson LQ-670 Paper feeding is crooked or the paper jams., The printer does not fully eject the paper.

Paper feeding is crooked or the paper jams.
Cause What to do
The paper guide is not
properly installed.
Remove the paper guide and install it
as described in “Attaching the paper
guide” in Chapter 1.
The edge guides are not
positioned correctly.
Move the edge guides so that they
match the width of your paper.
You may not be using the
right type of paper for the
printer.
Be sure you’re using the right type of
paper. See the paper specifications in
Appendix A.
The paper is old or creased. Use only new, clean sheets of paper.
Note:
If paper is jammed in the paper path, see “Clearing a Paper Jam” later in this
chapter.
The printer does not fully eject the paper.
Cause What to do
You may not be able to fully
eject your paper using the
LF/FF button.
Use the Load/Eject button to eject the
paper.
Your paper may be too long. Make sure the page length of your
paper is within the specified range. See
the single-sheet paper specifications in
Appendix A. Also check and adjust
the paper size setting in your
application or the printer driver.
7
Troubleshooting
R
Adonis Rev.E
A5 size Chapter 7
97/04/07 pass 0
Troubleshooting 7-9