Using the EPSON Remote! printer utility
The EPSON Remote! utility is included with the printer. This
utility allows you to change the printer’s default settings from
your computer.

Installing the printer utility

Follow the steps below to install the EPSON Remote! utility.
1. Insert the printer driver disk in a disk drive.
2. At the DOS prompt, type A:\SETUP (or B:\SETUP) and press
Enter.
3. At the next screen, select your printer and press Enter. The
default directory C:\EPUTIL appears.
4. Press Enter. The printer utility is copied into the EPUTIL
directory on drive C.

Accessing the printer utility

When you want to access the EPSON Remote! utility, follow these
steps:
1. Change the current directory to drive C.
2. Type PRNSET, and press Enter. Follow the on-screen instructions
to use the utility.
LAdonis Rev.E
A5 size Chapter 2
96/12/19 pass 0
2-14 Setting Up Your Software