Epson LQ-670 Vertical printed lines are not aligned.

Printing starts lower on the page than you expect, or the
bottom of a page is printed at the top of the next page.
Cause What to do
The lines-per-page, top and
bottom margin, or form
length setting is incorrect.
Adjust these settings in your
application software, as follows:
If your application software has a
lines-per-page setting, set it to 66
for letter size paper or 70 for A4 size
paper.
If your software does not have a
lines-per-page setting, try decreasing
the top margin or increasing the
bottom margin, or both, until you get
the results you want.
Adjust the form length setting if your
software has this option.
Vertical printed lines are not aligned.
Cause What to do
Bidirectional printing, which
is the printer’s standard
printing mode, may be out of
alignment.
Use the printer’s bidirectional
adjustment mode to correct this
problem. See “Using Bidirectional
Adjustment” later in this chapter.
7
Troubleshooting
R
Adonis Rev.E
A5 size Chapter 7
97/04/07 pass 0
Troubleshooting 7-23