❏Paper Source Click the paper source you want to use.
❏Orientation Select Portrait or Landscape. The
diagram on the screen changes according
to the orientation you select.
To access the following settings from your application, you may
need to click Printer, Setup, Options, or some combination of
these buttons. If you accessed the driver from the Control Panel,
click Options to access these settings.
❏Dithering You can leave this option set to Coarse,
which is the default setting, or select
another dithering pattern depending
on the kind of printout you want.
❏Intensity Control Move the slider to make your printout
lighter or darker.
Once you’ve checked your printer driver settings, you are ready
to print. If you have any trouble while printing, see Chapter 7,
“Troubleshooting,” for solutions.
For DOS Program Users Installing a printer driver for DOS applications
To install a printer driver in most DOS applications, you must
select the printer you are using during the installation or setup
procedure.
LAdonis Rev.E
A5 size Chapter 2
96/12/19 pass 0
2-12 Setting Up Your Software