Clearing a Paper Jam To clear a paper jam, follow these steps:
1 Press the Operate button to turn off the printer.
2. Open the printer cover.
3. If continuous paper is loaded in the printer, remove it as
described in “Removing continuous paper” in Chapter 3.
If continuous paper is jammed in the printer, tear off the
fresh supply at the back of the printer.
4. Turn the knob on the right side of the printer toward you to
remove the paper. Remove any remaining pieces.
5. If the paper is stuck where the printer ejects it, gently pull
the paper out of the printer.
6. Close the printer cover and press the Operate button to
turn on the printer. Make sure the Paper Out light is not
flashing and the Pause light is off.
cCaution:
Use the knob on the right side of the printer only to clear paper
jams when the printer is off. Otherwise, you may damage the
printer or change the top-of-form position.
Using Bidirectional Adjustment Mode If you notice that the vertical lines in your printout are not
properly aligned, you can use the printer’s bidirectional
adjustment mode to correct this problem.
During bidirectional adjustment, the printer prints three
sheets of alignment patterns, labeled Draft, Draft Copy, and
LQ. As described below, you select the best alignment pattern
from each sheet.
LAdonis Rev.E
A5 size Chapter 7
97/04/07 pass 0
7-24 Troubleshooting