Epson LQ-670 The top-of-form position of your continuous paper varies when you print several pages., The printer prints on (or too far away from) the perforation of your continuous paper., 7-12

The top-of-form position of your continuous paper varies
when you print several pages.
Cause What to do
The paper size setting in your
application or the printer
driver may not match the size
of the paper you are using.
Check the paper size setting in your
application or the printer driver.
The printer’s page length
setting may not match the
size of the paper you are
using.
Check the “Page length for tractor”
setting using the printer’s
default-setting mode or the EPSON
Remote! utility. See “Using the
Default-Setting Mode” in Chapter 4,
or “Using the EPSON Remote! printer
utility” in Chapter 2.
Your paper may be too heavy. Make sure that the weight of your
paper is within the specified range.
See the continuous paper
specifications in Appendix A.
The printer prints on (or too far away from) the perforation of
your continuous paper.
Cause What to do
The tear-off position is set
incorrectly.
Adjust the tear-off position using the
LF/FF or Load/Eject button. See
“Adjusting the tear-off position” in
Chapter 3.
The paper size setting in your
application or the printer
driver may not match the size
of the paper you are using.
Check the paper size setting in your
application or the printer driver.
LAdonis Rev.E
A5 size Chapter 7
97/04/07 pass 0
7-12 Troubleshooting