3. Move the paper release lever forward to the tractor position.
The printer automatically advances the continuous paper from the
standby position to the loading position when it receives data.
Using Micro Adjust The micro-adjust feature allows you to move paper forward or
backward in 1/180-inch increments. You can use this feature to
adjust the loading, printing, and tear-off positions.
Adjusting the loading position
The loading position is the position of the paper after the printer
loads it automatically. If your printing appears too high or low on
the page, you can change the loading position with the
micro-adjust feature as follows:
Note:
Top margin settings made in some application software override
adjustments you make to the loading position with the micro adjust
feature. If necessary, adjust the loading position in your software.
A33
3
R
Adonis Rev.E
A5 size Chapter 3
97/04/07 pass 0
Paper Handling 3-27